The car engine is the "heart" of the vehicle and needs frequent cleaning to maintain normal operation, extend the service life of the engine, and reduce the occurrence of failures.

1. Will there be oil stains and carbon deposits on the surface of automobile engine parts?

Due to the current poor air quality, insufficient oxygen supply, incomplete combustion, road conditions, forced crankshaft ventilation, the quality of gasoline itself, and the characteristics of EFI vehicles (vehicles with electronically controlled injection systems are prone to carbon deposits), automobile engines There will be a lot of oil, dust, and carbon deposits on the surface.

From this point of view, automobiles still have very high process requirements for spare parts. During production, the surfaces and inner cavities of spare parts need to be decontaminated and cleaned so that they can meet the granularity and cleanliness requirements of the surface and inner cavities of the parts. In the auto repair industry, fine cleaning also requires thorough cleaning of the disassembled parts. Therefore, it is more suitable to use industrial ultrasonic cleaning machines to clean engine parts, which can be fast, simple, effortless, and cost-saving. the goal of.

2. Working principle of ultrasonic cleaning machine

It uses high-frequency ultrasonic oscillation to generate tiny bubbles. The bubbles rapidly expand and contract in the liquid, producing strong impact and shear forces, which completely remove dirt, grease and other substances from the surface or interior of the object to be cleaned. The cleaning effect of the ultrasonic cleaning machine is very good. It can remove small stains, grease and other substances, and the cleaning time is very short, which can significantly improve work efficiency.

3. How to clean car engine

Ultrasonic physical cleaning and chemical cleaning with cleaning solutions are perfectly combined, and the ultrasonic frequency band and power density can be selected to fully and thoroughly clean oil, coke, colloid and other contaminants inside and outside various parts. The engine needs to be disassembled into parts first, and then the parts are put into an ultrasonic cleaning machine for cleaning. The parts to be cleaned include cylinder heads, valves, pistons, crankshafts, connecting rods, etc. During the cleaning process, attention should be paid to the cleaning time and cleaning fluid concentration of different parts to avoid affecting the performance and life of the parts.

Tullker - Makes Cleaning Easier

Tullker Co., Ltd.—an environmentally friendly industrial cleaning solution provider that focuses on ultrasonic industrial cleaning and integrates R&D, production, marketing, and after-sales. In ultrasonic cleaning, vacuum hydrocarbon cleaning, two-fluid cleaning, spray cleaning, A large number of successful cases have been accumulated in the fields of DPF regeneration and cleaning, and are sold in 96 countries around the world.